VoiceOver IP >> Products >> Telephones and Accessories

Multiservice LAN and WAN Networking
  • Multiple LAN and WAN network interfaces
  • End-to-end Quality of Service features
  • WAN optimization capabilities
  • Multiprotocol routing options
The InstantOffice™ system, a complete voice and data communications solution, delivers full-featured LAN and WAN connectivity for small to medium-sized businesses and branch offices. With its robust routing capabilities, this Integrated Communications Platform provides connectivity for all of today's standard data protocols and networking media.

Data networking with the InstantOffice system offers 10/100 Ethernet for high-performance LANs, which can be connected to the corporate backbone via high-speed WAN links. Routing can occur over a wide variety of WAN connections, including digital leased lines (T1 and DDS), frame relay, and ISDN PRI. By leveraging the system's remote access services, your business can extend its networks securely and seamlessly through phone lines to connect mobile users and telecommuters to network resources.

Corporate-class networking for small offices
The system is designed to provide corporate-class performance at a small office price. Network access charges can be reduced by integrating voice and data traffic over the same WAN access circuit using the built-in T1 multiplexer. Further savings can be realized by carrying voice traffic over the data network using the integrated voice over IP gateway with multiservice network capabilities. Site-to-site VPN or remote access VPN connections are enabled using the optional VPN services.

For added flexibility, two routing options are available for the InstantOffice system:
  • The InstantOffice Multiprotocol Router, based on the Microsoft NT Routing and Remote Access service (RRAS), provides standards-based LAN and WAN routing optimized for branch offices. The InstantOffice system extends the base RRAS elements with value-added services such as frame relay, WAN prioritization, and multiservice WAN interfaces, including SDSL and integrated digital T1 circuits.
  • The InstantOffice 1600-Router Card with Cisco IOS® Technologies offers a complete set of advanced security and encryption features; end-to-end Quality of Service (QoS) support for data, voice, and multimedia applications; and WAN optimization capabilities. This card delivers the sophisticated routing functionality provided by Cisco IOS Technologies, as well as full interoperability with other Cisco® equipment and proprietary protocols.

Support for multiservice applications
Multiservice applications-including IP telephony, voice/data integration, and desktop videoconferencing—require end-to-end QoS capabilities such as guaranteed bandwidth and delay contracts. The InstantOffice system provides features such as Resource reservation Protocol (RSVP), diff-serv, IP Multicast, and Weighted Fair Queuing (WFQ) to support this new class of interactive, time-sensitive applications.

InstantOffice Multiservice LAN and WAN Networking Specifications
Routing and remote access features
InstantOffice multiprotocol router
  • IP routing: RIP, RIPv2, OSPF
  • IPX routing: RIP/SAP
  • WAN connectivity: SDSL, T1, PRI, DDS, analog phone lines
  • WAN protocols: frame relay, PPP, Multilink PPP
  • WAN optimization: dial-on-demand routing (DDR), compression, and filtering
  • DHCP relay agent
  • Multiservice support: packet prioritization, diff-serv
  • Support for InstantOffice IP telephony services
InstantOffice 1600-Router Card
  • Supports Cisco 1600 series IOS versions and feature sets
  • IP routing: RIP, RIPv2, OSPF, IGRP, EIGRP, PIM, AppleTalk SMRP multicast
  • IPX routing: RIP/SAP, NLSP
  • AppleTalk routing: AppleTalk 1 and 2, RTMP
  • IBM/SNA: SDLC/SDLLC, Bisync, DLSw+
  • Transparent bridging
  • WAN connectivity: T1, DDS, analog phone lines, BRI, SMDS, Switched 56, and X.25
  • WAN protocols: frame relay, PPP, Multilink PPP
  • WAN optimization: DDR, compression, filtering, and spoofing
  • Multiservice support: RSVP, diff-serv, Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), IP Multicast
Remote access services
  • Out-of-band management access for remote instal/troubleshooting
  • Comprehensive dial-up networking support
  • RADIUS client support
  • Token card support
  • PPP and Multilink PPP
  • Microsoft Point-to-Point Compression
  • Restartable file copy
  • Idle disconnect
  • PPTP
Network management
  • Full SNMP instrumentation
  • MIBs implemented for data and voice services
  • Performance and capacity monitoring
  • Display of interface status in real time
  • Ping, Trace Route, NetStat
  • Packet capture and decode
  • WAN protocol trace capability
Common system components
Resource switch card 3 (standard on every chassis)
  • 4 10/100 Base-T Ethernet switch ports
  • 12 digital phone ports
  • 4 analog phone ports
  • 3 analog trunk ports (including 2 power failure transfer ports)
  • 1 internal 56-Kbps modems
  • Compliance: FCC Part 15 Class A, FCC Part 68, IC CS-03, UL 1950, C-UL
  • Connectors: 50-pin RJ-21x (phone), RJ-45 (Ethernet), 3.5mm phono (line-in, line-out), 15-pin VGA
Optional expansion interfaces
Resource switch card 3 expansion board*
  • 8 10/100 Base-T Ethernet switch ports
  • 12 digital phone ports
  • 8 analog phone port
  • 11 analog trunk ports
InstantOffice 1600-Router Card
  • Supports Cisco 1600 series IOS versions and feature sets
  • Connectivity to InstantOffice multiservice WAN modules
  • Universal serial interface: EIA/TIA-232, V.35, X.21, EIA/TIA-449, EIA-530 (interface type determined by cable)
  • Maximum memory configuration: DRAM 18MB, Flash 16MB
  • Three 10/100 Ethernet switch ports
  • Support for InstantOffice IP telephony services
  • Compliance: FCC Part 15 Class A, UL 1950, C-UL, IEEE 802.3, IEEE 802.3u 100Base-T, ISO/IEC 8802.3
  • Connectors: 60-pin universal serial interface (Cisco compatible), RJ-45
10/100Base-T Ethernet hub card
  • 12- and 24-port versions
  • 10/100 auto-sensing ports (dual speed per port)
  • Independent 10- and 100-Mbps segments on each card
  • Layer 2 100-Mbps switching between multiple cards for high performance
  • Full SNMP support and per-port statistics
  • Per-port LEDs indicating link and activity
  • Compliance: FCC Part 15 Class A, UL 1950, C-UL, IEEE 802.3, IEEE 802.3u 100Base-T, ISO/IEC 8802.3
  • Connector: RJ-45
T1/PRI trunk module
  • 1- and 2-port versions available
  • Line rate: FT1 and T1 (64 Kbps-1.544 Mbps)
  • Framing: ESF, SF/D4
  • Line code: AMI, B8ZS
  • Integrated CSU/DSU
  • Compliance: FCC Part 15 Class A, FCC Part 68, IC CS-03, UL 1950, C-UL, ANSI T1.101 (MTIE), ANSI T1.403-1995, AT&T TR62411, AT&T TR54016
  • Connectors: RJ-48C, dual bantam (monitor jack)
T1/PRI trunk module w/drop & insert serial interface
  • Line rate: FT1 and T1 (64 Kbps-1.544 Mbps)
  • Framing: ESF, SF/D4
  • Line code: AMI, B8ZS
  • Integrated CSU/DSU
  • Serial interface: V.35 DCE
  • Compliance: FCC Part 15 Class A, FCC Part 68, IC CS-03, UL 1950, C-UL, ANSI T1.101 (MTIE), ANSI T1.403-1995, AT&T TR62411, AT&T TR54016, CCITT V.35
  • Connectors: RJ-48C, dual bantam (monitor jack), DB-60
SDSL card
  • Speed: up to 2.32 Mbps
  • Loop length: up to 22,000 ft
  • Uses standard frame relay encapsulation for data transfer
  • Supports voice over IP
  • Line coding: 2B1Q
  • Compliance: FCC Part 15 Class A, UL 1950, C-UL
  • Connector: RJ-45
56/64-Kbps CSU/DSU module
  • Supports 56- and 64-Kbps clear-channel DDS
  • CSU and DSU loopbacks
  • Compliance: FCC Part 15 Class A, FCC Part 68, IC CS-03, UL 1950, C-UL, AT&T TR62310
* Resource switch card 3 expansion board can be added to the resource switch card 3 to form the RS3A, a doublewide card that uses two slots.

Top

Home | Products | FAQs | Services | About Us
Copyright 2003 Las Vegas Telecom. All rights reserved. Last modified May, 2003, Bizwala Web Design. Contact webmaster for questions or comments about this site.